Specifications

5 - 5
5.3 Specifying Connection Target QD75
SW
D5C-QD75P accesses the QD75 via PLC CPUs, serial communication modules,
etc.
Make the settings for the interfaces located midway along the communication path and
interfaces on the peripheral device side to perform the online operations (data
write/read/monitor/test and so on).
1) Click the "Online"
"Connection setup".
2) Change the following items on the Connection
setup dialog box.
"Transmission speed" 115.2 kbps
"I/O adr." A0
3) Click the OK
button.
IMPORTANT
In SW D5C-QD75P, connection setup must be performed each time a project is
opened in order not to access undesired QD75s.
When a project is opened, display the Connection setup dialog box before online
operation and click the OK
button. (The latest saved settings are retained.)
The online operation cannot be performed without connection setup.
The connection setup is not required for offline operation (such as editing
positioning data on the peripheral device).