User`s manual

Wrap the coated parts

with a heat contractile

tube.

(2) The shielded cable for connecting QD75 can be secured in place.

If the shielded cable is not secured, unevenness or movement of the

shielded cable or careless pulling on it could result in damage to the

QD75 or drive unit or shielded cable or defective cable connections could

cause mis-operation of the unit.

(3) To make this product conform to the EMC directive and low voltage

instruction, be sure to use of a AD75CK type cable clamp (manufactured

by Mitsubishi Electric) for grounding to the control box.

QD75

AD75CK

20cm(7.88inch)

to 30cm(11.82inch)

Inside control box

Using the AD75CK, you can tie four cables of about 7mm outside

diameter together for grounding.