Specifications

Type
Number of
connectable units
Connection cable
length
Max. text length
Data transfer speed
Access from program
Number of occupied
EQGPIB
Max. 15 units (including this module)
Between module and device, between devices:
Within 2m (Within a total of 20m in a single system)
63422 bytes for send and receive combined
Transfer speed of the slowest device among the
connected devices
Intelligent function module direct device (or FROM /
TO instruction) and I/O instruction
I/O points 16 points per slot
PC CPU Module
Partner Products
GP-IB Module
Partner Products
PLC peripheral devices
Partner Products
Q Series is able to mount a fully featured PC directly on the Q main base unit alongside the I/O and other CPU types.
• Complete PC functionality in the space of three standard Q Series I/O modules
• Fully integrated into the Q Series system; the Q PC CPU is able to use all I/O, special function modules and networking options
available with no special programming or hardware required
• Supplied driver software provides numerous program functions to allow third party program environments (such as Visual
Basic ™ or Visual C++™) full access to all Q Series system components
• Q PC may be used standalone with no other processor types to offer a completely PC based control system where required
• May be combined with sequence, motion and process CPUs where required
• Industrially hardened design offers the same durability as the rest of the Q Series hardware components
• Comprehensive port selection allows multiple connection options to most third party devices (serial, parallel, USB, PCMCIA,
Ethernet, monitor, keyboard, mouse, IDE, etc.)
• Fanless construction avoids maintenance issues
• Options for Microsoft Windows 2000, NT and NT Embedded
• Options for rotating media or solid state silicon disks
Features
1. The text length that can be communicated at one
time for send and receive combined is as large as
63422 bytes.
2. This module has a master/slave function.
When the master function is selected, the module
operates as a system controller and can send
address, universal and other commands. When the
slave function is selected, the module communicates
data under the command of the system controller.
Features
Type
MPU
Memory
Video memory
USB
Serial
Parallel
PS2 mouse/keyboard
LAN
Display
FDD
PC card
Silicon disk module
Hard disk module
OS
PPC-CPU686 (MS) -128
Mobile Celeron Processor _LP 400MHz
128MB
2MB
2 channels (1 channel as extra connector)
2 channels (D-SUB 9P) (1 channel as extra connector)
1 channel (extra connector)
Mini DIN 6P can be used simultaneously by conversion cable.
100BASE-TX/10BASE-T
Analog RGB H-Dsub 15P
26P half connector (for connection of Contec make FDD)
PCMCIA, CardBus Type1,2 x 2 or Type3x 1
Separate module (PCC-SDD (MS)-32/64/128/192/320/500/1000)
1 slot occupied
Separate module (PPC-HDD (MS) -5) 5GB 1 slot occupied
Windows
®
NT4.0, Windows
®
2000, Windows
®
NT4.0 Embedded
IF
The GP-IB module is mounted on the Q series
PLC base to communicate with measuring
devices through GP-IB line.
EHGP10
handy graphic programmer
¡Peripheral device designed for field:
The EHGP10 handy graphic programmer is a Peripheral device
designed for field compatible with the MELSEC-QCPU as well as
the QnA and A PLC CPUs. It also has high resistance to
environment, and can be operated easily with the touch panel.
¡Programming unit:
The EPU01 programming unit is compatible with the MELSEC-
QCPU as well as the QnA and A PLC CPUs, and can edit
programs in the CPU, test devices, and monitor devices. (For the
QCPU, this programming unit is usable with the high-
performance model only.)
INCREASED NEW POSSIBILITIES OF AUTOMATION APPLICATIONS