Specifications

ManualsBrandsMitsubishi ManualsGamesMelsec-Q QD75D2

All device comments

Extended file registers

(when SRAM card/flash card is used)

Extended file registers

(when SRAM card/flash card is used)

Program, MM/DD/YY version

Memory card

ATA general file

The mounting area of the Q series is 60% smaller than that of the existing model (AnS series).

The Q series has a wide assortment of 2, 3, 5, 8 and 12-slot bases. The freedom of mounting space ensures the optimum configuration.

Extension bases can be connected directly by extension cables without extension base connecting modules. Extension bases that do not

require a power supply module save space and costs.

The Q series uses CC-Link open network to reduce wiring, achieving the reduction in the number of wiring processes.

Programs can also be stored in the memory card, and can be

uploaded from the memory card by the dedicated instruction

(PLOAD) and executed. This allows the program memory to be

virtually extended.

The high-performance model QCPU is equipped with a small PC

card slot to insert an SRAM card (1M/2M bytes), flash card (2M/4M

bytes) or ATA card (8M/16M/32MB bytes) extended memory card.

By loading large-capacity extended memory, not only large-

capacity file management is possible, but also comment settings

for all data devices and old programs for correction history can be

stored in memory.

The Q series can control a maximum of 8192 points (input device

points) in a remote I/O network such as CC-Link, or a maximum of

4096 points (I/O points) for direct I/O only.

The DC input module's input response time can be changed. The

response time can be selected according to your application, e.g.

response time of 0.1ms for fast response or 70ms for a reliable

response (in consideration of noise margin, etc.).

(Note 6).

Up to seven extension bases (eight when counting the main base)

can be connected to accept up to 64 modules. Also, the overall

distance of extension cables is max. 13.2m, enabling high freedom

of extension base layout.

*If a 12-slot base is used, the maximum number of I/O, intelligent function

and network modules loaded is 16/24/64.

Note 6: QX40-S1 : Select from 0.1, 0.2, 0.4, 0.6 and 1ms.

QX4*, QX7*, QX8* : Select from 1, 5, 10, 20 and 70ms.

Program

CPU

Program

memory

Program

memory

Memory card

Read

Delete

PLOADP"1:PROGRAM1"M10

PUNLOADP"PROGRAM1"M20

Q00JCPU

Q00CPU

Q01CPU

Q02CPU

Q02HCPU

Q06HCPU

Q12HCPU

Q25HCPU

Q00JCPU

Q00CPU

Q01CPU

Q02CPU

Q02HCPU

Q06HCPU

Q12HCPU

Q25HCPU

256

1024

4096

2048

8192

CPU

Number of

I/O Points

(Note 4)

Number of I/O Device Points

(Note 5)

(Including remote I/O points)

2 (max.)

(max.)

7 (max.)

16 (max.)

24 (max.)

64 (max.)

13.2 (max.)

CPU

Number of Extension

Base Units

Number of Loaded

Modules

Overall Extension

Cable Length (m)

Note 4: Number of I/O points on main and extension bases directly

controllable by a CPU module.

Note 5: Total number of I/O points on main and extension bases directly

controllable by a CPU module and I/O points that can be controlled

as remote I/O by a remote I/O network.

PROGRAM1

5-slot main base 245mm (9.65inch)

3-slot main base 189mm (7.44inch)

8-slot main base 328mm (12.92inch)

12-slot main base 439mm (17.30inch)

(Depth: 98mm (3.86inch))

(Main and extension bases are the same size)

PULL

USB

PULL

Q25HCPU QX10 QJ71BR11

RUN

T.PASS

ERR

MNG

D.LINK

ERR

RUN

T.PASS

ERR

MNG

D.LINK

ERR

RUN

T.PASS

ERR

MNG

D.LINK

ERR

RUN

T.PASS

ERR

MNG

D.LINK

ERR

QX41

MODE

RUN

ERR

USER

BAT

BOOT

RS-232

QX10 QJ71BR11QX41

POWER

Q61P-A1

98mm (3.86inch)

Mounting area

comparison

Q series

Existing model

(AnS series)

AnS

series

Number of I/O Slots

Main Base

Q33B

Q35B

Q38B

Q312B

Mounting Size (mm(inch))

189(7.44) 98(3.86)

245(9.65) 98(3.86)

328(12.92) 98(3.86)

439(17.30) 98(3.86)

Base unit types (Requiring power supply module)

*The base units are designed for the Q series I/O, intelligent function and

network modules. The A and AnS series modules cannot be loaded on the base

units given in the above table.

Extension Base

Q63B

Q65B

Q68B

Q612B

Number of I/O Slots

Main Base

Q52B

Q55B

Mounting Size (mm(inch))

106(4.17) 98(3.86)

189(7.44) 98(3.86)

Base unit types (Requiring no power supply module)

Master station Standby master station

Personal computer control enabled by master board designed for personal computer

Local station

Optical repeater

(10Mbps, max. 2km)

AJ65BT-G4-S3 (Note 1)

Connector type

compact remote

I/O station (Note 2)

T branch

(10Mbps)

Wide choice of partner products

Various devices

CC-Link open network

Optical space transmission

(

2.5Mbps, 0~100m

)

T branch

(10Mbps)

T branch

(10Mbps)

RS-232C RS-422 cable

RS-422 cable

Module power supply

Connector type

compact remote

I/O station

For details of CC-Link products, refer to the

C-Link and CC-Link product catalogs and the

CC-Link product catalogs published by the

CC-Link Partner Association.

Note 1: The AJ65BT-G4-S3 is a unit connected to

CC-Link as an intelligent device station and

linked to a personal computer loaded with the

GX Developer comprehensive programming

tool to make communication with CPUs on

the master and local stations.

Note 2: The connector type compact remote I/O is a

remote I/O module designed for a CC-Link

system giving a 33% reduction in cable-

connected mounting area as compared to the

current compact remote I/O module.

Configuration

software makes

setting easy for network

configuration

To construct small to large scaled systems, the Q series has a wide

assortment of CPU modules having 8k to 252k step program

capacities and up to 128k words, large-capacity standard RAMs,

enabling a selection of the CPU modules which matches the

machinery/equipment control capabilities.

Note 3: Memory that stores the data used in sequence programs such as file

registers and local devices (with the exception of the basic model

CPU).As a built-in type RAM, the sequence program having a lot of

file registers and local devices stored in standard RAM can run

rapidly.

Note 4: Memory which stores the data used in sequence programs such

as file registers, local devices etc. As a built-in type RAM, the

sequence program having a lot of file registers and local devices

stored in standard RAM can run rapidly.

Q00JCPU

Q00CPU

Q01CPU

Q02CPU

Q02HCPU

Q06HCPU

Q12HCPU

Q25HCPU

32k

64k

128k

18k

29k

14k

28k

60k

124k

252k

Basic

model

High-performance

model

Basic

model

High-performance

model

Basic

model

High-performance

model

CPU

Device Memory

(Words)

Program Capacities

(Steps)

Standard RAM

(Words)

Memory Card

(Number of slots)

Seventh extension base

Main base

Max. 64

modules

Overall

distance

:13.2m

(43.28feet)

Mounting Area

Mounting Freedom

CC-Link Open Network for Wiring Saving

Program Capacities and Large

Standard RAM Capacities

Number of Control I/O Points

Extended Memory

Up to 7 Extension Bases Connectable

Variable Time Constant of Input Module

SPACE SAVING AND WIRING SAVING FLEXIBLE SYSTEM CONFIGURATION