Specifications

The Q series has a wide assortment of useful goods to further expand PLC applications.
Interface terminal units: Available in various output modules, i.e. relay, triac and transistor, and in various
connection systems, i.e. one-wire, two-wire and independent common types, to
support a wide range of output applications.
Product list
The GP-IB module is mounted on the Q series PLC base to communicate with measuring devices through GP-IB line.
1. The text length that can be communicated at one time for send
and receive combined is as large as 63422 bytes.
2. This module has a master/slave function.
When the master function is selected, the module operates as
a system controller and can send address, universal and other
commands. When the slave function is selected, the module
communicates data under the command of the system
controller.
EQGPIB
Max. 15 units (including this module)
Between module and device, between devices: Within 2m
(Within a total of 20m in a single system)
63422 bytes for send and receive combined
Transfer speed of the slowest device among the connected devices
Intelligent function module direct device
(or FROM/TO instruction) and I/O instruction
16 points per slot
Type
Number of
connectable units
Connection cable
length
Max. text length
Data transfer speed
Access from program
Number of occupied
I/O points
Interface terminal units
EHGP10 handy graphic programmer
Type
Max. number of
system slaves
Max. number of
I/O points
Max. number of
analog I/O points
Connection type
Transmission distance
QJ71AS92
62 (A-Slaves: 31, B-Slaves: 31)
248 points/248 points (1 point = 1 bit)
124 points/124 points (1 point = 16 bits)
Bus network type (any of star, line, tree and ring)
Max. length 100m
(max. length 300m when two repeaters are used)
*Compatible with the AS-i Standard Ver. 2.11. Cannot be used with the A mode model
QCPU.
Features
Class
CPU module-compatible
communication module,
intelligent module
compatible
DC: Input,
output module
(connector type)
compatible
AC/DC: Input, output
module (terminal block
type) compatible
DC: Output module
(connector type)
compatible
Positioning module
compatible
Thermocouple input
module compatible
Product
Connection cable
Optical converter
Conversion cable
Conversion adaptor
Fiber-optic cable
Quick connector type
distributed module
Connector/terminal block
conversion module
Connection cable
PLC/terminal block
conversion module
Connection cable
Interface terminal unit
Connection cable
Connection cable
Converter module
Connection cable
Type
FA-CBLQC
***
R2
FA-CBL30USB
FA-CBL25P6P
***
FA-CBL9S9P
***
FA-OPT232
**
FA-CBL25S
***
FA-A25S
***
FA-FB
****
M
FA-CB
**
XY
*
FA-TB
**
XY
*
FA-CBL
***
FMV
FA-(F)CBL
***
MMH
FA-TB161AC
**
FA-CBL
**
TD
FA-TH16Y*****
FA-CBL***FM2V
FA-CBL***MMH20
FA-CBLQ75
*****
FA-CBLQ70*****
FA-TB20TD
FA-CBLQ64TD**
Outline
RS-232C cable for connection of personal computer and CPU (Mini-DIN 6P male)-(D-Sub 9P female) (3, 5, 15m)
USB cable for connection of personal computer and CPU (3m)
RS-232C cable for connection of personal computer, display or like and CPU (Mini-DIN 6P male)-(D-Sub 25P male) (3, 5, 14m)
RS-232C cable for connection of personal computer and intelligent module (D-Sub 9P male)-(D-Sub 9P female) (3, 5, 15m)
Optical converter for connection of RS-232 device
Conversion cable for connection of optical converter (0.2m)
Conversion adaptor for connection of optical converter
Fiber-optic cable for connection of optical converter (within enclosure, indoors, portable, outdoors)
Quick connector type 8- or 16-point distributed module for DC
Terminal block type 8- or 16-point distributed module or 32-point terminal block module for DC
Cable for connection of input or output module and quick connector type distributed module or connector/terminal block conversion module
Cable for connection of quick connector type distributed modules or terminal block type distributed modules
Terminal block conversion module for AC/DC, 16 points/common, 1- or 2-wire type
Cable for connection of input or output module and PLC/terminal block conversion module
Relay, triac or transistor output terminal unit (16 points)
Cable for connection of interface terminal unit, 40 cores
Cable for connection of interface terminal unit, 42 cores
Cable for connection of positioning module and servo amplifier (for QD75)
Cable for connection of positioning module and servo amplifier (for QD70)
Terminal block module for Q64TD
Cable for connection of Q64TD terminal block module
Type
Analog input system
Analog input range
Number of channels
Resolution
Conversion speed
Accuracy
Temperature
drift compensation
Ambient
temperature
25 5˚C
0.3%
0.4%
0.1%
0~55˚C
Yes
No
Q64AD
Voltage/current
4
Q68ADV
Voltage
8
1/16,000 (0~10V)
(Note 2)
Q68ADI
Current
8
Voltage: 0-5, 1-5, 0-10, 10V, Current: 0-20, 4-20mA
80µs/channel (+160µs when temperature drift compensation is made)
Note 2: 1/16,000 in the input range of 10V, 1/12,000 in other input ranges.
Type
Number of channels
Input system
Input type
Max. counting speed
Counting range
Number of output points
QD62
5/12/24VDC
200kpps
QD62D
2
Differential
Single phase, two phases, CW/CCW
500kpps
32bit (-2,147,483,648~2,147,483,647)
2 points/channel
QD62E
5/12/24VDC
200kpps
Yes (high-performance model QCPU only)
Output system
Tr. sink
12/24VDC
Tr. sink
12/24VDC
Tr. source
12/24VDC
Event interrupt function
Ambient
temperature
25 5˚C
0 to 55˚C
Type
Analog output system
Analog output range
Number of channels
Resolution
Q64DA
Voltage/current
4
A68DAV
Voltage
8
A68DAI
Current
8
Voltage: 0-5, 1-5, 10V, Current: 0-20, 4-20mA
Accuracy
Conversion speed
80µs/ch
Note 3: 1/16,000 in the output range of 10V
Within 0.1% (voltage: 10mV, voltage: 20µA)
Within 0.3% (voltage: 30mV, voltage: 60µA)
1/12,000
(Note 3)
Q62DA
Voltage/current
2
Type
Input type
Number of input points
Rated input voltage/current
Max. number of
simultaneous input points
ON voltage/ON current
OFF voltage/OFF current
Response time
Common system
Note 1: Supported by CPU module product information "021120000000000-B" or later
and GX Developer Ver. 6 or later.
QI60
DC input positive common
16 points (interrupt processing condition setting in units of 1 point)
24VDC/approx. 6mA
100% simultaneously ON
19V or higher 4mA or higher
11V or higher 1.7mA or higher
0.1/0.2/0.4/0.6/1ms
(Note 1)
16 points/common
Type
Transmission speed
/distance (Ver.1.10)
Number of modules
connected
Number of cyclic points
per network
Event interrupt function
Transmission system
Synchronization system
Transmission path type
QJ61BT11
10Mbps/100m, 5Mbps/160m, 2.5Mbps/400m,
625kbps/900m, 156kbps/1200m
64 modules
Remote I/O: 2048 points
Remote register: 256+256 points
Yes (high-performance model QCPU only)
Broadcast polling system
Frame synchronization system
Bus type (EIA RS485 compliant)
Type
Transmission path
Transmission speed
Synchronous system
Protocol
CPU interrupt function
Compatibility
Callback function
QJ71C24 QJ71C24-R2
RS-232 1Ch.
RS422/485 1Ch.
RS-232 2Ch.
(Note 4)
Note 4: 2 channels of peripheral devices can be connected together.
50/300/600/1200/4800/9600/
14.4k/19.2k/38.4k/57.6k/115.2kbps
Asynchronous mode
Dedicated, TTY, bidirectional
Yes (high-performance model QCPU only)
Compatible with A1SJ71UC24/A1SJ71QC24
communication protocol
Enabled for modem communication Updated
Type
Communication speed
Transmission path
Transmission
distance
Number of stations
connected
Compatible mode
Number of cyclic
points per network
Event interrupt function
Compatibility
QJ71LP21-25
25Mbps/10Mbps
Optical SI/QSI-200/250,
H-PCF-200/250
duplex loop
At 25Mbps: Interstation 1km
(QSI, broad-band H-PCE)
/400m (H-PCF)/ 200m (SI)
At 10Mbps: Interstation 1km
(QSI, broad-band H-PCE)
/1km (H-PCF)/ 500m (SI)
64
QJ71BR11
10Mbps
Coaxial 75Ω,
simplex bus
Overall distance
500m (5C-2V)
32
MELSECNET/H mode, MELSECNET/10 mode
MELSECNET/H mode:
LB:16k bit, LW:16kw, LX/LY:8k bit
MELSECNET/10 mode:
LB:8k bit, LW:8kw, LX/LY:8k bit
Yes (high-performance model QCPU only)
Connectable with Q/QnA/AnU series MELSECNET/10 in MELSECNET/10 mode;
Connectable with Q series MELSECNET/10 in MELSECNET/H mode.
Type
Programming language
General I/O
Max. baudrate
Program memory
Common memory
Extended registers
Extended relays
Buffer memory
Communication
specifications
QD51
AD51H-BASIC
64k bytes/2 tasks
8k bytes
1k words
1k points
3k words
27 input points:17 output points
for 2 channels: 38400bps
QD51-R24
Conforming to RS-232,
D-Sub 9 pin, 2 channels
Conforming to RS-232,
D-Sub 9 pin, 1 channel
Conforming to RS-422/485,
terminal block, 1 channel
Memory
Note:Please contact your local distributer.
Peripheral device designed for field : The EHGP10 handy graphic programmer is a Peripheral device
designed for field compatible with the MELSEC-QCPU as well as the
QnA and A PLC CPUs. It also has high resistance to environment, and
can be operated easily with the touch panel. (For the QCPU, this
peripheral device is usable with the high-performance model only.)
Programming unit : The EPU01 programming unit is compatible with the MELSEC-QCPU
as well as the QnA and A PLC CPUs, and can edit programs in the
CPU, test devices, and monitor devices. (For the QCPU, this
programming unit is usable with the high-performance model only.)
Interrupt Module MELSECNET/H Interface Modules
High-Speed, Precision Analog-to-Digital
Converter Modules
High-Speed, Precision Digital-to-Analog
Converter Modules
High-Speed Counter Modules
Intelligent Communication Modules
CC-Link Interface Module
Serial communication modules
AS-i master module
16 17
GP-IB Module
PLC peripheral devices
Factory Automation Goods
INCREASED NEW POSSIBILITIES OF
FACTORY AUTOMATION
WIDE ASSORTMENT OF
HIGH-PERFORMANCE MODULES
4
Partner Products
Partner Products
Partner Products