Specifications
Offering High Precision Large Screen LCDs for
Public Information Display
Offering High Precision Large Screen LCDs for
Public Information Display
Mitsubishi’s large LCD displays allow the presentation of beautiful
and dynamic images from a range of 32”, 40” and 46” screen size options.
Developed exclusively for public use, these high-spec LCD panels display high-definition
images accurately and vividly from DVDs and PCs.
Featuring multi-screen display and zooming functions,
as well as centralised control and management from a host PC,*
Mitsubishi’s range of LCD displays are ideal for image
and information communication in public spaces.
*
4 x 4 = 16 screens for MDT321S
*Manual correction up to 50m for MDT321S
*Compensation level depends on the quality of signal source and cable.
*Not applicable to MDT321S
*Connectable number of displays depends on system configuration.
*Different display for MDT321S
By choosing a signal from the given 3 methods below, an appropriate
signal is automatically selected among the connected signal sources.
This alleviates the manual selection work at signal source change.
When a system is composed of multiple displays, a daisy chain
through RS-232C can be made. With this set-up, you can have
effective centralised control: you can remotely change the setting of
each display or operate self-diagnosis (up to 26 units). This also allows
you to control multiple displays collectively with one remote control.
Feeding power simultaneously to multiple displays by turning the
breaker on, may cause over-current at power up. With the Power ON
Delay Function, you can turn on the power of each display in a
staggered manner to avoid temporary over-current. The delay time for
power on can be selected in a range from 0~50 seconds.
PC
About 100m
Long cable
*Applicable only to BNC input
"Long Cable Compensation"
Normal Zoom (V/H) Zoom (Horizontal) Zoom (Vertical)
■PC制御の概念
■リモコン制御の概念
FIRST DETECT
Multi-screen display of 5 x 5 = 25 screens at maximum
Advanced Functions to Enable Various System ConfAdvanced Functions to Enable Various System Confiigugurraattions. ions.
Assuring Easy ControlAssuring Easy Control//Management for Long Term Operation.Management for Long Term Operation.
in
RS-232C
Primary
IR Remote Controller
Secondary Secondary
RS-232C RS-232C
RS-232C RS-232C
out in out in
out in out in
To reduce the load given to a LCD panel, and the risk of image-
persistence, various settings are available. The optional settings
include selection of display gamma, operation of a cooling-fan,
brightness control for lowering the
maximum brightness and a motion
function to slightly move the screen
vertically and horizontally. The optimum
setting can be selected depending on
the application.
3
FRAME COMP function not applied. FRAME COMP function applied.
N
EWS
"Automatic input-signal selection" "Automatic input-signal selection"
prevents manual work for signal set-up.prevents manual work for signal set-up.
The "Power ON Delay Function", starts multiple The "Power ON Delay Function", starts multiple
displays in a stable manner.displays in a stable manner.
“Screen Saver FunctionScreen Saver Function” reduces the load on a LCD panel reduces the load on a LCD panel
at long term operation. at long term operation.
Major detection contents of “Self-diagnosis function” Non-lighting of backlight due to inverter circuit trouble
(excluding MDT321S)/Trouble of power supply circuit/Temperature rise inside body/Status of input signal, etc.
Colour temperature can be set in
a broad range from 2,600K to
10,000K. Particularly ideal when
a picture on screen is displayed
for broadcasting. It can be shown
in natural colours without the
need for troublesome colour
adjustment work.
Easy colour setting in a wide range of Easy colour setting in a wide range of
colour temperature from 2,600K to 10,000K.colour temperature from 2,600K to 10,000K.
By selecting "Custom", in zoom mode and simply increasing or
decreasing zoom slider, you can adjust the diagonal ratio of the
original screen, or proportions in horizontal and vertical directions.
Zoom functions to expand the original image Zoom functions to expand the original image
in any aspect ratio.in any aspect ratio.
"Tiling", enables multi-screen operation up to 25 (5x5) screens, by
simply setting the position of each divided screen in OSD. Working
together with tiling, the "Frame Comp", features allows a smooth
image of entire screen, by compensating for the bezel width.
"Tiling" and "Frame Comp" demonstrates multi-screens "Tiling" and "Frame Comp" demonstrates multi-screens
with a smoothwith a smooth, continuous image. continuous image.
Zoom mode/Custom
"Long Cable Compensation" prevents image distortion."Long Cable Compensation" prevents image distortion.
Even when a cable connection gets as long as 100m, by automatically
adjusting the phase of R,G,B signals, colour shift is corrected and
signal distortion is prevented. Furthermore, the new "Video Equalizing
Function", compensates for a dull signal caused by a long cable, and
optimises the signal
shape. These unique
functions are specially
designed for
public
space applications,
expanding the flexibility
of system layouts
between
signal source
and display.
The first input signal detected is displayed. When this signal disappears, another
input signal will be automatically displayed. (applicable only to RGB1/2/3)
The last input signal detected is displayed. When another signal is detected ,
the display will automatically switch over. (applicable only to RGB1/2/3)
When DVD/HD or VIDEO input signal is present, the display will change and
keep to the DVD/HD or VIDEO input, even when RGB1/2/3 is receiving signal.
LAST DETECT
VIDEO DETECT
Using Using “Self-diagnosis FunctionSelf-diagnosis Function” a a failure failure
can be captured by a host PC.can be captured by a host PC.
Centralised / Remote control of multiple displays Centralised / Remote control of multiple displays
through a RS-232C Daisy Chain.through a RS-232C Daisy Chain.
The "Self-diagnosis function" allows you to detect any problems that
may occur inside the display. The detected data can be read through
RS-232C by the host PC, this enables users to conduct centralised
control remotely.