Specifications

37
7-1. Quick IP address setting
IP address can be easily set to an address between 192.168.1.1 and 192.168.1.15 with dipswitch SW851.
Set SW851 before turning on the power.
No.
SW851
[0: OFF, 1: ON]
IP address Subnet mask Gateway
1 2 3 4
0 0 0 0 0
Default
192.168.1.1
Default
255.255.255.0
Default
0.0.0.0
1 0 0 0 1 192.168.1.1
255.255.255.0 0.0.0.0
2 0 0 1 0 192.168.1.2
3 0 0 1 1 192.168.1.3
4 0 1 0 0 192.168.1.4
5 0 1 0 1 192.168.1.5
6 0 1 1 0 192.168.1.6
7 0 1 1 1 192.168.1.7
8 1 0 0 0 192.168.1.8
9 1 0 0 1 192.168.1.9
10 1 0 1 0 192.168.1.10
11 1 0 1 1 192.168.1.11
12 1 1 0 0 192.168.1.12
13 1 1 0 1 192.168.1.13
14 1 1 1 0 192.168.1.14
15 1 1 1 1 192.168.1.15
Note
● If you forget the EB-50 IP address, you can start EB-50 by changing the SW851 setting and temporarily using an arbitrary
IP address. (It is recommended to paste a label with the IP address on the EB-50, so that the IP address is available at
all times.)