Specifications

34
6-5. Connecting LAN cable
Connect the LAN cable to the LAN port on the EB-50.
● The LAN cable is field supplied. Use a category 5 or above straight LAN cable.
● Use a switching HUB.
● The maximum distance between the switching HUB and EB-50 is 100 m (328 ft).
Fig. 6-5
LAN port
Note
● LAN must be installed before the unit installation. Route the LAN cable to the EB-50 in the same way as the M-NET
transmission cables.
● Leave enough space around the LAN port on the EB-50 to allow for the connection of the cables. Refer to section 5-3
"Installation."
● When connecting the EB-50 to an existing LAN, consult the system administrator to decide the IP address. Change the
IP address setting before connecting the LAN cable to the LAN port.
● To prevent unauthorized access, always use a security device such as a VPN router when connecting the EB-50 to the
Internet.