Specifications

Method 1: Installation using L-fittings

1. Have a metal control box ready. (Minimum steel thickness: 1 mm (3/64 in))

2. Attach the supplied two L-fittings to the EB-50 with the supplied M3 screws. (Fig. 5-3)

3. Properly install the EB-50 with the M4 screws (field-supplied) horizontally inside the metal control box (Fig. 5-3), taking into

consideration the installation space (Fig. 5-1).

(8 mm (5/16 in))

Fig. 5-3

Note

● Each L-fitting must be attached to the EB-50 with two M3 screws.

● The EB-50 to which the L-fittings are attached must be fixed to the metal control box with total of four M4 screws to

prevent it from falling.

● The surface on which the EB-50 will be installed needs to be strong enough to support its weight (1.0 kg (3 lbs) each).