Specifications

11
Notes on the microSD card installed on the EB-50
● The microSD card installed on the EB-50 has been set up at the factory. Do not use other SD cards as proper function
cannot be guaranteed.
● The microSD card installed on the EB-50 differs from the ones sold on the market.
● The EB-50 will not start up if the microSD card does not function properly or is not installed.
● Only the microSD card that has been formatted on EB-50 can be used.
● Do not use the microSD card installed on the EB-50 for any other equipment.
Precautions for the replacement of microSD card
● Because of the characteristics of the microSD card, the read/write performance may degrade over time. It is
recommended to replace the microSD card with our microSD card (available as service parts) every 10 years, even if it is
not damaged.
● If the microSD card becomes damaged, the EB-50 settings data and energy management data will be lost. It is
recommended to back up these data periodically.
The EB-50 settings data can be backed up to an external memory, and these data can be restored to the EB-50. (Refer
to section 9 “Utility” in the Instruction Book (Web Browser for Initial Settings) for details.) The energy management data
can only be output in a CSV file, and these data cannot be restored to the EB-50. (Refer to chapter 9 “Maintenance” in
the Instruction Book (Web Browser for System Maintenance Engineer) for details.)
● Only a qualified technician should insert or remove the microSD card.
● Before inserting or removing the microSD card, turn off the power to the EB-50.
● If the microSD card becomes damaged, consult your dealer for a replacement.