Technical Manual

58
Initial setting
Display detail setting
F1 F2 F3 F4
Display details
Cursor
Change
Select:
Clock
Temperature
1
Room temp.
Auto mode
No 24h
Yes / No
Yes / No
F1 F2 F3 F4
Main menu:
Initial setting menu
Cursor Page
Main/Sub
Clock
Main display
Contrast
Display details
F1 F2 F3 F4
Clock display
Cursor Cursor
Select:
Clock
12h disp.
AM/PM disp.
Yes No
Main
Sub
Button operation
[
2
]
[
1
]
Move the cursor to the "Display details" with the F1 or F2 button, and
press the
button.
Select "Initial setting" from the Main menu (refer to page 19), and press the
button.
Move the cursor to the "Clock" with the F1
or F2 button, and change the
setting with the F4
button.
Clock
[
3
]
Move the cursor to the "Clock", "12 disp." or "AM / PM disp." with the F1
or F2 button, and change the setting with the F3 or F4 button.
The factory settings are "Yes" (display) and "24h" format.
• Clock display: Yes (Time is displayed on the Main display)
No (Time is not displayed on the Main display)
• Display format: 24h : 24h format
12h : 12h format
• AM / PM display (Effective when the display format is 12-hour):
AM / PM before the time [AM12:00]
AM / PM after the time [12:00AM]
Press the
button to save the settings.
Note: Time display format will also be reflected on the time and schedule
setting display. The time is displayed as shown below.
12-hour format : AM12:00 – AM1:00 – PM12:00 – PM1:00 – PM11:59
24-hour format : 0:00 – 1:00 – 12:00 – 13:00 – 23:59
Navigating through the screens
• To go back to the Main menu ..................
button
• To return to the previous screen ..............
button