Technical Manual

Maintenance

Button operation

[

]

Select "Maintenance" from the Main menu (refer to page 19), and press

the

button.

Select "3D i-See sensor" with the

button, and press the but-

ton.

Select "Seasonal airflow" with the

button, and press the

button.

Select the setting with the F4

button.

OFF → Cooling only → Heating only → Cooling/Heating → OFF…

After changing the setting, press the

button to save the setting.

OFF: The function is disabled.

Cooling only: When the thermostat turns off during cooling mode, the

vanes move up and down.

Heating only: When the thermostat turns off during heating mode, the

vanes move to the horizontal airflow direction to circulate the air.

Cooling/Heating: The function is enabled during both cooling mode and

heating mode.

* In order to enable this function, the airow direction must be set to "Auto".

F1 F2 F3 F4

Seasonal airflow

Select:

Seasonal airflow

Cooling/Heating

Seasonal airow function