Technical Manual

42
Controller operation : Function setting
F1 F2 F3 F4
Energy saving
Energy saving
-
-
-
-
Select:
Cursor Content
Day selection:
Mon
Mon
Changes saved
No.
Cool
Room
AutoSet temp.
Mode Temp. Fan
Fri
8:15 12:00 17:00 21:00
18:00
8:15 12:00 16:00 19:00 21:00
<Example1>
•
pattern1/ 8:15~12:00/ 90%
•
pattern2/ 12:00~17:00/ 80%
90
80
70
60
50
•
pattern3/ 18:00~21:00/ 90%
•
pattern4/ 8:15~12:00/ 90%
<Example2>
•
pattern1/ 8:15~21:00/ 90%
•
pattern2/ 12:00~16:00/ 70%
•
pattern3/ 16:00~19:00/ 90%
•
pattern4/
No restiction
(%)
90
80
70
60
50
No restiction
(%)
No restiction
90%
restiction
90%
restiction
70%
restiction
80%
restiction
90%
restiction
80%
restiction
90%
restiction
No restiction No restiction No restiction No restiction
• The lower the value, the greater the energy-saving effect.
[
5
]
The pattern setting screen will appear.
Press the
F1
button to move the cursor to the desired pattern number.
Move the cursor to the desired item with the F2
button out of the start
time, stop time, and energy-saving rate (arranged in this order from the
left).
Change the settings with the F3
or F4 button.
will appear on the Main display in the Full mode when the
unit is operated in the energy saving mode.
• Start/Stop time: settable in 5-minute increments
* Press and hold the button to rapidly advance the numbers.
• Energy-saving rate:
The setting range is 0% and 50 to 90% in 10% increments.
Press the button to save the settings.
A conrmation screen will appear.
Navigating through the screens
•
To go back to the setting change/day of the week selection screen .... button
• To go back to the Main menu .....................................................
button
• To return to the previous screen ................................................
button
♦
Overlapping times can be set. Refer to <Example 2> for details on the operation methods.