Technical Manual

41
Controller operation : Function setting
Energy saving
P
Administrator
Main
F1 F2 F3 F4
Energy saving
Setting display:
Cursor
Auto return Yes
Cool: min,
Heat: min,
Schedule No
Mon Tue Wed Thu Fri Sat Sun
F1 F2 F3 F4
Energy saving
-
-
-
-
Setting display:
day
Mon Tue Wed Thu Fri Sat Sun
No.
F1 F2 F3 F4
Energy saving
Select:
Cursor
Energy saving No / Yes
F1 F2 F3 F4
Energy saving
-
-
-
-
Input:
day Select
Mon Tue Wed Thu Fri Sat Sun
No.
Mr.Slim
Only
Button operation
[
2
]
The screen to see the schedule will appear.
Press the
F1
or
F2
button to see the settings for each day of the week.
Press the
button to go to the setting screen.
[
1
]
Bring up the "Energy saving" screen. (refer to page 39)
Move the cursor to the "Schedule," and press the
button.
Administrator passwaord setting. (Refer to page 61)
Setting the energy-saving operation schedule
[
3
]
The screen to enable (Yes)/disable (No) the energy-saving operation schedule
will appear.
Select "No" or "Yes" with the F3
or F4 button.
Press the
button to go to the setting change/day of the week selection
screen.
The setting change / day of the week selection screen will appear.
* Up to four operation patterns can be set for each day.
Move the cursor to the desired day of the week with the F1
or F2 button,
and press the F3
button to select it. (Multiple days can be selected.)
Press the
button to go to the pattern setting screen.
[
4
]
Set the Energy-saving operation start time, end time and performance save value for one week.