Technical Manual

32
Controller operation : Function setting
Weekly timer
Button operation
P
Administrator
Main
F1 F2 F3 F4
Main
Main display:
Cursor Page
Main menu
Vane·Louver·Vent. (Lossnay)
High power
Timer
Weekly timer
OU silent mode
F1 F2 F3 F4
Weekly timer
Setting display:
day Page
Mon Tue Wed Thu Fri Sat Sun
No.
F1 F2 F3 F4
Weekly timer
Select:
Cursor
Weekly timer No / Ye s
The Weekly timer will not work in the following cases:
when the On / Off timer is enabled, when the weekly timer is disabled, during
an error, during check (in the service menu), during test run, during remote
controller diagnosis, when the clock is not set, during Function setting, when
the system is centrally controlled (On / Off operation temperature setting or
Timer operation from local controller is prohibited).
[
2
]
The current settings will appear.
Press the
F1
or
F2
button to see the settings for each day of the week.
Press the
F4
button to see patterns 5 through 8.
Press the
button to go to the setting screen.
[
1
]
Select "Weekly timer" from the Main menu (refer to page 19), and press the
button.
Administrator passwaord setting. (Refer to page 61)
[
3
]
The screen to enable (Yes) and disable (No) the weekly timer will appear.
To enable the setting, move the cursor to "Yes" with the F3
or F4 button,
and press the
button.
• ON / OFF and temperature setting can be scheduled for each day.
• "Weekly timer" is not executed when the On / Off timer is enabled.