Specifications

OSD Main Menu –continued

LCD ADJUST Sub-Menu (Analog input only): Under the Main Menu,

select LCD ADJUST using the [+] or [–] button, then press [MENU] button to enter

LCD ADJUST Sub-Menu.

PC/MAC: Switching between PC at 800X600 resolution and MAC at

832X624 resolution, using [+] or [–] button. Then press [MENU] to initiate

the switch between PC and MAC shown as above.

H SIZE: Adjusting the width of the screen image. Select H-SIZE, using [+] or

[–] button, then press [MENU] button to activate the function. Press [+]

button to increase the width of the screen image, press [–] button to

decrease the width of the screen image shown below. Press [MENU] to

return to LCD ADJUST Sub-Menu.

H - POSITION:

Moving the screen image to the right or left. Select H - POSITION

using the [+] or [–] button, then press the [MENU] button to activate the

function. Press [+] button to move the screen to the right, [–] button to move

to the left. Press [MENU] to return to LCD ADJUST Sub-Menu.

V - POSITION:

Moving the screen image up or down. Select V - POSITION

using the [+] or [–] button, then press [MENU] to activate the function.

Press [+] button to move the screen image up, [–] button to move down.

Press [MENU] to return to LCD ADJUST Sub-Menu.

FINE TUNE: Aligning the performance slightly. Select FINE TUNE using the

[+] or [–] button, then press [MENU] button to activate the function. Press [+]

or [–] button until the screen image looks crisp, sharp and focused. Press

[MENU] to return to LCD ADJUST Sub-Menu.

AUTO-SYNC: Automatically adjusts the image to the best performance.

Press [+] or [–] button to select AUTO SYNC, then press [MENU] button to

activate AUTO SYNC.

NOTE: • When setting up this monitor for the first time, perform

AUTO-SYNC before use.

• To perform AUTO-SYNC, first display an image that makes the

entire screen very bright.

MAIN MENU: Returning to OSD main menu. Press [+] or [–] button to select

MAIN MENU, then press [MENU] button to return to OSD Main Menu.

LANGUAGE: Selecting preferred language used in the OSD menus. Under Main

Menu, scroll to Language using [+] or [–] button, then press[MENU] button to

activate the function. Press [+] or [–] button to choose preferred Language, then

press [MENU] to return to Main Menu.

MAIN MENU: Returning to OSD main menu. Press [+] or [–] button to select

MAIN MENU, then press [MENU] button to return to OSD Main Menu.