User`s guide
58 Quadro Workstation User’s Guide
Chapter 4
Using nView Multi-Display Settings
For further details on using this mode, see the NVIDIA Application Note titled
“Using nView MultiView Modes with NVIDIA Quadro NVS-based Graphics Cards”
Arranging Displays on the Settings Page
In nView Dualview mode, you can arranging displays on the Windows Properties
Settings page to match the actual setup of your physical displays.
The examples shown in Figure 4.19 and Figure 4.20 are Windows XP, but the
procedure explained below applies to all Windows operating systems.
Figure 4.19
Display Settings — Horizontal and Vertical
When using multiple displays, the desktop can be extended horizontally and
vertically, as well as at other angles by page. You can drag the images to the positions
that represent how you want to move items between your displays.
• For example, if you’re using two displays and you want to move items from one
display to the other by dragging left and right, position the images side-by-side
(Figure 4.19).
QuadroGuide_.book Page 58 Monday, November 14, 2005 2:05 PM