User`s guide
178 Quadro Workstation User’s Guide
Appendix A
Using Two NVIDIA GPU-Based Graphics Cards
Before You Begin
This appendix discusses an example of using two multi-display NVIDIA GPU-based
graphics cards in one computer running Windows XP.
Note: When running Windows with multiple graphics cards (i.e., two or more
NVIDIA GPU-based graphics card are installed in your computer), the same
NVIDIA driver (version) must be installed for each graphics card.
Before Installing the NVIDIA ForceWare Graphics Display
Driver
1 Make sure you have an AGP slot and a PCI slot on your computer.
2 Install the appropriate NVIDIA GPU-based PCI and AGP cards.
3 Make sure the graphics cards are securely seated in their slots.
4 Connect the appropriate display devices to each card, making sure that the cable
connectors are securely attached to the graphics cards.
5 Turn on your display devices.
Examples and Setup
The examples in this appendix show the following NVIDIA-based graphics cards
and configurations.
•The Quadro FX 3000 GPU-based graphics card is an AGP card supporting multi-
display nView functionality.
•The GeForce4 MX GPU-based graphics card is a PCI card supporting nView
multi-display functionality.
Note: Depending on the number of PCI slots in your computer, you can install
more than one PCI graphics cards. These examples use only one PCI
graphics card.
QuadroGuide_.book Page 178 Monday, November 14, 2005 2:05 PM