Specifications

5. TV Menus 51
Inputs Menu
Inputs Menu Options
N ame
Cable Box, Camcorder, CD/
Audio, DVD (DVD, DVD2,
Blu-Ray), DVR, Game (Game,
PS, Xbox, Wii), MP3 Player, PC,
Satellite, VCR, AVR
On/Off (ANT 1 and ANT 2 only)
Delete (deactivated HDMI only)
Control On, Control Off
(CEC-
enabled HDMI devices; operates
only when Inputs > NetCommand
HDMI Control is set to On )
Lets you assign or change names of inputs appearing in •
the Input Selection menu.
Press - to move between inputs.
Press - to select a name.
Lets you turn • Ant-1 and Ant-2 On/Off (to display/hide in Input
Selection menu).
Lets you delete unused HDMI inputs from the • Input Selection
menu.
If you change the name of an input after performing Net-•
Command “learning,” the IR codes you “learned” are
erased.
General Notes
When you change an input name in the Name menu and then exit the Name menu:
The name is changed•
The icon in the • Input Selection menu is changed
Audio and video settings are changed to the defaults for the new device type.•
All previous Net Command “learning” for the input is erased.•
Notes for HDMI devices
Disconnecting an HDMI device:• When you disconnect an HDMI device, the icon remains in the Input Selec-
tion menu until you remove it. Select Delete in the Inputs > Name menu to remove an unwanted icon for an HDMI
input.
NetC• ommand for HDMI and CEC-Enabled Devices: If CEC conflicts occur, turn off CEC signals in one
of these ways: a) Turn off all NetCommand for HDMI signals from the TV (Inputs > NetCommand HDMI
Control menu), b) Turn off NetCommand HDMI signals for specific devices (Inputs > Name menu), or c) Turn
off each device’s internal CEC capability. See Appendix D for the TV’s NetCommand for HDMI Control or, to
turn on/off a specific device’s response to CEC signals, see the device’s owner’s manual.
• Names of CEC-enabled devices: CEC-enabled devices send their own predefined name to the TV. You
cannot change the name of a CEC-enabled device; applies only when Inputs > NetCommand HDMI Control
is set
to On .
O rder
Lets you put frequently used icons at the start of the Input Selection menu.
Press 1.
to highlight the icon to move.
Press 2.
ENTER to confirm the selection.
Press 3. to drag the icon to the desired position.
Press 4. ENTER to set the new position.
Learn
Sets up or changes Net Command IR control of the current viewing device.
See detailed instructions in chapter 6, “Net Command IR Control.”
AV Re-
ceiver
Sets up Net Command IR control of an A/V receiver.
See detailed instructions in chapter 6, “Net Command IR Control,” starting on page 61 .
Ne tCommand
HDMI Control
On, Off Select On or Off to enable or disable the TV’s control of CEC-enabled
devices. See Appendix D for details.
Downloaded From TV-Manual.com Manuals