Specifications

46 5. TV Menus
Setup Menu Options
Lang uage
English
Spanish
Display on-screen menus in either English or Spanish.
Note: To listen to audio in other languages (when available), see the section
on the AV menu, Audio submenu, and refer to either Listen To > SAP (analog
signal) or Language (digital signal).
S can
Ant-1 Air
Ant-1 Cable
Ant-2 Air
Ant-2 Cable
Scan memorizes broadcast channels to make them easier to find. To start
channel memorization:
1. Highlight one of the input selections based on your connection to ANT 1
or ANT 2 :
• Air when connected to an indoor or outdoor antenna.
• Cable when connected to direct cable (no cable box)
2. Press to highlight START.
3. Press
ENTER to start channel memorization for the selected input.
Setup Menu
Use the Setup menu to:
Select English or Spanish for menus and on-screen •
text.
Scan the channels available for the antenna or cable •
service connected to th e ANT 1 or ANT 2 jacks.
Edit channel options, including channel locking.•
Set the TV’s internal clock.•
Set the TV Timer to turn on the TV automatically at •
a designated time.
Set the energy mode for power consumption when •
the TV is powered off.
Control 3D mode.•
Notes on Scan and channel memorization:
Channel memorization may take up to 15 minutes •
to complete.
To stop channel memorization before completion, •
press
CANCEL .
When watching TV, press •
CH to move through
memorized channels.
To add a • digital channel that does not appear in the
Edit menu without repeating channel memorization:
Look up the 1. physical channel number for the new
digital channel. The website www.antennaweb.org
can help you find the physical channel number.
Tune to any channel on the 2. ANT 1 or ANT 2 input
your antenna is connected to.
Use the number keys and 3.
CANCEL key to enter the
physical channel number followed by “-1” and ENTER .
For example, for physical channel 36, press
3 6
—
CANCEL
1
ENTER .
The TV will search for a digital channel on the channel
36 frequency. When it finds the channel, it will:
a. Add the channel to memory.
b. Change the channel number to the virtual
channel number sent by the broadcaster.
c. Add to memory any associated sub-channels.
Rememorize channels if you move the TV to a •
different geographic area with a different channel
line-up.
Setup menu, Scan option
Downloaded From TV-Manual.com Manuals