Specifications
2. TV Setup 17
Setup Procedure for TV Inputs
Power on the TV.
1.
Connect your devices to the TV, making note
2.
of which TV input is used for each device. See
chapter 3, “TV Connections.”
Note: If you wish to use an HDMI device’s CEC capa-
bilities, follow the steps in Appendix D
.
When the TV detects a new connection, the
3.
Auto
Sensing screen for the connection type will display.
Select the device type if required.
First select a
device type.
Next perform
IR “learning.”
Sample Auto Input Sensing screen.
Important Note for NetCommand IR Users
Be sure to select the correct device type here. Although
you can change the device type later in the Inputs > Name
menu, any “learned” Net Command IR codes will be erased
when you make the change.
You can perform Net Command IR “learning” after
4.
selecting the device type or at a later time when
convenient. To perform now, highlight the Learn
icon and press
ENTER
. See
“Initial NetCommand
Setup for Most Devices,” page 57 or “Setting Up
NetCommand IR Control of an A/V Receiver,” page
61 .
Press
5.
EXIT
to close the Auto Sensing screen. The
TV will then display the Auto Sensing screen for
the next connection it finds.
After completing Auto Input/Auto Output Sensing,
6.
you may wish to set up or change control of your
equipment using one of the home-theater control
methods described in this Owner’s Guide. See
“About Home-Theater Control Systems” on page
19 .
Setting Up TV Inputs, continued
Auto Input/Auto Output S ensing Screens
See below for how different connections are handled
by Auto Input/Auto Output Sensing.
Most Device Types.• Select the device type from
the on-screen list. The device type you select here
will appear as an icon in the Input Selection menu.
Press
to highlight the device type connected
to the input. Some device types also display a
sub-menu of names—useful if using more than one
of the same device type. See the sample Auto
Input Sensing screen shown.
A/V Receiver•
The TV detects audio connections on the -
DIGITAL AUDIO OUTPUT jack and the right (red)
AVR AUDIO OUTPUT jack.
For an HDMI connection, select - AVR from
the list of device types if the A/V receiver is
not recognized automatically.
HDMI Devices Compatible with the TV’s •
Net Command for HDMI Feature.
Compatible
CEC-enabled HDMI devices are often recognized
automatically by the TV. After connecting the
device, you may briefly see the standard Auto
Input Sensing screen before the TV recognizes
the device type. See
Appendix D
.
Downloaded From TV-Manual.com Manuals