Technical information

ENGINE – TIMING BELT, TIMING BELT B

11-20

TIMING BELT, TIMING BELT B

Removal and fitting

Caution

If Brembo brake callipers are being used take care that they are not scratched by other

components or tools because there is a chance that the paint might peel off. In

addition, if any brake fluid gets on the callipers, it should be wiped off immediately.

Jobs to be completed before removal and after fitting

•Removal and refitting of the valence. (Ref Section 51: Front bumper)

• Removal and refitting of the LH side cover.

• Checking and adjustment of the tension of the drive belt. <Only after fitting>

• Removal and refitting of the crankshaft pulley.

• Removal and refitting of the cross member bar.

•Removal and refitting of the front exhaust pipe.

Removal procedure

1. Pressure hose connection

2. Timing belt front upper cover

3. Water pump pulley

4. Idler pulley

5. Drive belt auto-tensioner

6. Timing belt front lower cover

• Remove the engine mount bracket

• Adjust the tension of the timing belt

7. Timing belt

8. Tensioner pulley

9. Tensioner arm

10. Auto-tensioner





 









