Operation Manual

Free-hand Advanced Security Transmitter (F.A.S.T.-key) (if so equipped)
Features and controls 5-29
5
Take your vehicle and all the remaining
F.A.S.T.-keys to your authorized Mitsubishi
Motors dealer to have your ID codes pro-
grammed again.
N00561100030
To add a F.A.S.T.-key, you must already have
two registered F.A.S.T.-keys. You need to
register the ID code to the vehicle.
Registering the ID code can be done by your
authorized Mitsubishi Motors dealer. Or it
can be done by yourself (except for vehicles
sold in Canada).
For you to register the ID code yourself, fol-
low the “Customer F.A.S.T.-key program-
ming” procedure below.
If you choose to have your authorized Mit-
subishi Motors dealer register the ID code,
take your vehicle and all remaining F.A.S.T.-
keys to your authorized Mitsubishi Motors
dealer.
N00561200073
You can program new F.A.S.T.-keys to the
system if you have two valid (already regis-
tered) F.A.S.T.-keys, blank (not registered)
F.A.S.T.-key and emergency key (specially
cut for your vehicle at your Mitsubishi
Motors dealer).
To use the new F.A.S.T.-key, it is necessary to
register the key with both the electronic
immobilizer and keyless entry system.
Also refer to “Keyless entry system: Cus-
tomer F.A.S.T.-key programming” on page
5-33.
For F.A.S.T.-key programming, follow the
procedures below.
1. Remove the emergency key from the
F.A.S.T.-key. Refer to “Emergency key”
on page 5-23.
2. While pushing the lock release buttons
(A), remove the cover of the ignition
switch.
3. Insert the emergency key into the ignition
switch.
Additional F.A.S.T.-key
NOTE
 You are provided with two F.A.S.T.-keys, but
you may register up to four F.A.S.T.-keys.
You can obtain blank F.A.S.T.-keys specially
cut for your vehicle from your Mitsubishi
Motors dealer.
Customer F.A.S.T.-key program-
ming (Except for vehicles sold in
Canada)