Operation Manual

Keyless entry system (if so equipped)
Features and controls 5-11
5
 This device must accept any interference
received, including interference that may
cause undesired operation.
N00544100077
1. Before replacing the battery, remove static
electricity from your body by touching a
metal grounded object.
2. With the Mitsubishi mark facing you,
insert the cloth-covered tip of a flat blade
screwdriver into the notch in the remote
control transmitter case and use it to open
the case.
3. Remove the remote control transmitter
from the remote control transmitter case.
Then, open the remote control transmitter
using the method described in step 2.
4. Remove the old battery.
5. Install a new battery with the +side (A)
down.
6. Close the remote control transmitter
firmly.
CAUTION
 Changes or modifications not expressly
approved by the manufacturer for compli-
ance could void the user’s authority to oper-
ate the equipment.
Procedure for replacing the
remote control transmitter bat-
tery
NOTE
 Be sure to perform the procedure with the
Mitsubishi mark facing you. If the Mitsubi-
shi mark is not facing you when you open the
remote control transmitter case, the buttons
may come out.
+ side
- side
Coin type battery
CR1620