Operation Manual

Replacement of light bulbs
Vehicle care and maintenance 9-47
9
3. To install the bulb, perform the removal
steps in reverse.
N00944100260
1. Insert a screwdriver into the notch of the
light assembly and pry gently to remove
the lens.
2. While holding down the tab (A), pull out
the bulb.
3. To install the bulb, perform the removal
steps in reverse.
NOTE
 Before replacing the bulb, put the dome light
(front)/reading lights switch into the “OFF”
position.
 When mounting the lens, align the tab (B)
with the hole on the vehicle body.
Dome light (rear) (if so equipped)
NOTE
 Wrap a cloth around the tip of the screw-
driver to keep from scratching the lens.
NOTE
 Before replacing the bulb, put the dome light
(rear) switch into the “OFF” position.
 When mounting the lens, align the tab (B)
with the hole on the vehicle body.