Operation Manual

Replacement of light bulbs
9-46 Vehicle care and maintenance
9
2. Remove the socket and bulb assembly
together by turning it counterclockwise.
3. Remove the bulb by pulling it out.
4. To install the bulb, perform the removal
steps in reverse.
N00944500206
1. Insert a screwdriver into the notch of the
light assembly. Gently pry to remove the
lens.
2. While holding down the tab (A), pull out
the bulb.
Dome light (front)/Reading
lights (if so equipped)
NOTE
 Wrap a cloth around the tip of the screw-
driver to keep from scratching the lens.