Operation Manual

Replacement of light bulbs
9-44 Vehicle care and maintenance
9
N00943701514
1. Remove the screws (A) from the light
unit.
2. Remove the light unit in the rear direc-
tion.
3. Remove the socket and bulb assemblies
by turning them counterclockwise.
CAUTION
 Handle halogen light bulbs with care. The
gas inside a halogen light bulb is highly pres-
surized, so dropping, knocking, or scratching
a halogen light bulb can cause it to shatter.
 Never hold the halogen lights bulb with a
bare hand, dirty glove, etc.
The oil from your hand could cause the bulb
to break the next time the fog lights are used.
If the glass surface is dirty, clean it with
alcohol and let it dry completely before
installing the bulb.
Rear combination lights
Tail and stop lights, rear turn sig-
nal lights and rear side-marker
lights
B- Tail and stop light
C- Rear turn signal light
D- Rear side-marker light