Operation Manual

Replacement of light bulbs
Vehicle care and maintenance 9-43
9
2. Pull the cover out in the direction of the
arrow shown in the illustration.
3. Remove the screws (B) and pull the entire
light unit out.
4. Push the connector (D) to disconnect and
remove the fog light.
5. Remove the bulb assembly (E) by turning
it counterclockwise.
6. To install the bulb, perform the removal
steps in reverse.
NOTE
 When unfastening the screws, be careful not
to mistakenly move the beam position
adjustment screw (C).
Passenger’s side Driver’s side
NOTE
NOTE
 When mounting the cover, align the hook (F)
on the cover with the hole in the body.