Operation Manual

Replacement of light bulbs
9-42 Vehicle care and maintenance
9
3. Push the connector (D) to disconnect and
remove the fog light.
4. Remove the bulb assembly (E) by turning
it counterclockwise.
5. To install the bulb, perform the removal
steps in reverse.
N00943601799
1. Remove the screw (A).
NOTE
 When mounting the cover, align the hooks
(F) on the cover with the hole in the body.
CAUTION
 Handle halogen light bulbs with care. The
gas inside a halogen light bulb is highly pres-
surized, so dropping, knocking, or scratching
a halogen light bulb can cause it to shatter.
 Never hold the halogen lights bulb with a
bare hand, dirty glove, etc.
The oil from your hand could cause the bulb
to break the next time the fog lights are used.
If the glass surface is dirty, clean it with
alcohol and let it dry completely before
installing the bulb.
Front fog lights (Type 2) (if so
equipped)