Operation Manual

Engine coolant
9-8 Vehicle care and maintenance
9
N00955100042
The oil filter should be replaced at the time or
mileage specified in the “WARRANTY AND
MAINTENANCE MANUAL”.
Only use high quality replacement filters on
this vehicle. The manufacturer’s specifica-
tions for Genuine Mitsubishi oil filters
require that the filter can withstand a pressure
of 256 psi (1.8 MPa). A Genuine Mitsubishi
oil filter is the best replacement filter.
Follow the installation instructions printed on
the filter.
N00937800542
The coolant reserve tank (A) lets you quickly
see when you need to add coolant. When the
engine is cold, the level in the reserve tank
should be between the “FULL” and “LOW”
marks. The radiator usually stays full so there
is no reason to remove the radiator cap (B)
except when you check the coolant freeze
point or replace the antifreeze coolant.
Vehicles with turbocharger
NOTE
 Select engine oil of the proper SAE viscosity
number according to the atmospheric tem-
perature.
 SAE 0W-30 and 0W-40 engine oil are rec-
ommended to use to improve engine start-
ability on a very cold weather condition.
To replace the oil filter
Engine coolant
To check the coolant level
*- Front of the vehicle
To add coolant
Use “Mitsubishi Motors Genuine Super Long
Life Coolant Premium” or an equivalent*.
Except for vehicles with turbocharger
FULL
LOW
Vehicles with turbocharger
FULL
LOW