Operation Manual

Listen to Radio
7-42 Comfort controls
7
N00716900027
This explains how to listen to AM and FM
radio broadcasts.
Press the RADIO key to switch the band.
Switch between AM and FM bands.
The selected band is indicated on the display.
*: When a satellite tuner is connected
Turn the /SEL key to the frequency to lis-
ten to.
Collective search for stations that can be
received.
Press the SCAN key.
When a station is received, this is played for 5
seconds, then the product searches for the
next station.
Register the broadcast station in advance, and
select this at a later time.
1. Tune in to the frequency to register.
2. Hold down any of the keys from the 1RPT
key to the 6 key.
A “Beep” sounds, and the preset key is
registered.
During RBDS broadcast reception, select
PTY (program content), and automatically
scan for stations.
1. During FM reception, press the PTY key.
This switches to the PTY selection mode.
2. Press the PTY key to select PTY.
*
2
:
Requires a separately-purchased Blue-
tooth-capable audio device (vehicles
with a Bluetooth
®
2.0 interface).
*
3
:
Requires a satellite tuner connection.
Listen to Radio
To Listen to the Radio
NOTE
 Bands switch in the order AM, FM1, FM2,
SIR1*, SIR2*, SIR3*, and SIR4*.
 If no signal is received, bands will not be
switched to SIR2, SIR3, or SIR4.
Manual/Seek Station Selection
/SEL key
(counter-
clockwise)
Reduces the frequency
being received.
/SEL key
(clockwise)
Increases the frequency
being received.
key
(hold down)
Release the button to start
seek station selection, and
when a station is received,
scanning stops.
key
(hold down)
Scan Station Selection
NOTE
 Press this button again while receiving the
station to return to normal reception.
Preset Memory
NOTE
 The preset memory can register a maximum
of 6 stations for each band.
 If a preset key that already has a station reg-
istered is selected, then this is overwritten
with the new preset.
 Pressing the preset key will select the previ-
ously registered frequency.
PTY Search