Operation Manual

Automatic air conditioning with Celsius scale (if so equipped)
7-24 Comfort controls
7
The above indicates the factory settings. You
can personalize the air selection switch and
air conditioning switch to match your per-
sonal preferences.
Contact your Mitsubishi Motors dealer or a
repair facility of your choice for assistance.
Refer to “Personalizing the air conditioning
switch (Changing the function setting)” on
page 7-26.
Refer to “Personalizing the air selection
(Changing the function setting)” on page
7-25.
N00737100136
To change the amount of air flowing from the
vents, turn the mode selection dial. Refer to
“Changing the mode selection” on page 7-2.
N00737200241
Normally, use the outside air position to keep
the windshield and side windows clear and to
quickly remove fog or frost from the wind-
shield.
To change the air selection, simply press the
air selection switch. A sound will be made
every time you press the switch.
 Outside air {Indicator light (A) OFF}
Outside air is introduced into the passen-
ger compartment.
 Recirculated air {Indicator light (A) ON}
Air is recirculated inside the passenger
compartment.
When the air conditioning turns on, the air
selection is controlled automatically. When
the air conditioning turns off, the air selection
automatically goes back to the outside air
position.
If high cooling performance is desired, or if
the outside air is dusty or contaminated in
some way, use the recirculation position.
Switch to the outside air position every now
and then to keep the windows from fogging
up.
NOTE
 While the engine coolant temperature is low,
the temperature of the air from the heater
will be cool/cold until the engine warms up,
even if you have selected warm air with the
dial.
 When the temperature is set to the highest or
the lowest setting under the AUTO opera-
tion, the air selection and the air conditioning
will be automatically changed as follows.
Also, if the air selection is operated manually
after an automatic changeover, manual oper-
ation will be selected.
• Quick Heating (When the temperature is set
to the highest setting)
Outside air will be introduced and the air
conditioning will stop.
• Quick Cooling (When the temperature is set
to the lowest setting)
Inside air will be recirculated and the air
conditioning will operate.
Mode selection dial
Air selection switch