Operation Manual

Manual air conditioning without MAX A/C mode (if so equipped)
7-16 Comfort controls
7
N00731200249
For ordinary cooling
1. Set the mode selection dial to the “ ”
position.
2. Push the air selection switch (A) to set it
to the outside air position.
3. Push the air conditioning switch (B).
4. Change the temperature by turning the
control dial clockwise or counterclock-
wise.
5. Set the desired blower speed.
N00731300224
Set the mode selection dial to the positions
shown in the illustration and set the air selec-
tion switch (A) to the outside air position.
The air flow will be directed to the leg area
and the upper part of the passenger compart-
ment. Set the desired blower speed.
Warm air flows to the leg area and unheated
or slightly warm air (depending upon the
position of the temperature control dial) flows
to the upper part of the passenger compart-
ment.
Cooling
NOTE
 If the outside air is dusty or contaminated in
some way, push the air selection switch (A)
to set it to the recirculation position. Let in
some outside air from time to time for good
ventilation.
 To cool the leg areas, set the mode selection
dial to the “ ” position.
Combination of unheated air and
heated air
NOTE