Operation Manual

Manual air conditioning without MAX A/C mode (if so equipped)
7-14 Comfort controls
7
quickly remove fog or frost from the wind-
shield.
To change the air selection, simply press the
air selection switch. A sound will be made
every time you push the switch.
 Outside air {Indicator light (A) OFF}
 Recirculated air {Indicator light (A) ON}
When the air conditioning turns on, the air
selection is controlled automatically.
The air selection indicator light (A) shows the
selected position.
If the outside air is dusty or contaminated in
some way, use the recirculation position.
Switch to the outside air position every now
and then to keep the windows from fogging
up.
N00702100028
You can change the following functions to
match your preference.
 Enable automatic air control:
When the air conditioning operates, the
air selection switch will be automatically
controlled.
 Disable automatic air control:
Even when the air conditioning operates,
the air selection switch will not be auto-
matically controlled.
 Changing the settings
Press the air selection switch for about 10
seconds or longer.
When the setting has changed, the system
will beep and the indicator light will flash.
• When the setting has changed from
enabled to disabled,
the system will beep three times and the
indicator will flash three times.
• When the setting has changed from dis-
abled to enabled,
the system will beep two times and the
indicator light will flash three times.
NOTE
 When the air conditioning operates with the
air selection switch (A) in the outside air
position, the system automatically deter-
mines whether to continue using outside air
or to perform recirculation.
If the outside temperature is high, the system
selects recirculation to achieve rapid cooling
and causes the air selection indicator in the
switch to illuminate. Press the air selection
switch to return to outside air.
CAUTION
 Using recirculated air for a long time may
cause the windows to fog up.
NOTE
 While the mode selection dial is set to the
“ ” position, the air conditioning com-
pressor will run automatically. The outside
air position will also be selected automati-
cally. (In this case, the air conditioning indi-
cator will not change.)
Personalizing the air selection
(Changing the function setting)