Operation Manual

Manual air conditioning without MAX A/C mode (if so equipped)
Comfort controls 7-13
7
N00730500229
N00736500133
When the ignition switch is in the “ON” posi-
tion, select the blower speed by turning the
blower speed selection dial.
Turning the dial clockwise will increase the
blower speed; turning the dial counterclock-
wise will decrease it. When the dial is set to
the “OFF” position, all fan-driven airflow
will stop.
N00736600176
Turn the temperature control dial clockwise
to make the air warmer. Turn it counterclock-
wise to make the air cooler.
N00736700177
To change the amount of air flowing from the
vents, turn the mode selection dial. Refer to
“Changing the mode selection” on page 7-2.
N00736800279
Normally, use the outside air position to keep
the windshield and side windows clear and to
Control panel
1- Temperature control dial
2- Air selection switch
3- Blower speed selection dial
4- Air conditioning switch
5- Mode selection dial
6- Electric rear window defogger switch
P.5-160
Blower speed selection dial
Temperature control dial
NOTE
 While the engine coolant temperature is low,
the temperature of the air from the heater
will be cool/cold until the engine warms up,
even if you have selected warm air with the
dial.
Mode selection dial
Air selection switch