Operation Manual

Manual air conditioning without MAX A/C mode (if so equipped)
7-12 Comfort controls
7
N00731400443
Set the mode selection dial (between “ ”
and “ ”) to remove frost or mist from the
windshield and door window.
Use this setting to keep the windshield and
door windows clear of mist, and to keep the
leg area heated (when driving in rain or
snow).
1. Set the mode selection dial to the “ ”
position.
2. Select your desired blower speed by turn-
ing the blower speed selection dial.
3. Select your desired temperature by turn-
ing the temperature control dial.
For quick defrosting
1. Set the mode selection dial to the “ ”
position.
2. Set your blower to the maximum speed.
3. Set the temperature to the highest posi-
tion.
N00730300269
The air conditioning can only be used while
the engine is running.
Defrosting or defogging (wind-
shield, door windows)
CAUTION
 For safety, make sure you have a clear view
through all the windows.
For ordinary defrosting
NOTE
 While the mode selection dial is set between
“ ” and “ ” position, the air condition-
ing compressor will run automatically. The
outside air position will also be automati-
cally selected. (In this case, the air condition-
ing indicator will not change.)
 While the between “ ” and “ ” position
is selected, you cannot turn the air condition-
ing off or select the recirculation position.
This prevents the windows from fogging up.
 To defog quickly, direct the air flow from the
side vents toward the door windows.
 When defrosting, do not set the temperature
control dial near the “MAX A/C” cool posi-
tion. This will blow cool air on the window
glass and fog it up.
Manual air conditioning
without MAX A/C mode
(if so
equipped)
NOTE