Operation Manual

Manual air conditioning with MAX A/C mode (if so equipped)
7-8 Comfort controls
7
N00736600219
Turn the temperature control dial clockwise
to make the air warmer. Turn it counterclock-
wise to make the air cooler.
N00736700151
To change the amount of air flowing from the
vents, turn the mode selection dial. Refer to
“Changing the mode selection” on page 7-2.
N00736800367
Normally, use the outside air position to keep
the windshield and side windows clear and to
quickly remove fog or frost from the wind-
shield.
To change the air selection, simply press the
air selection switch. A sound will be made
every time you push the switch.
 Outside air {Indicator light (A) OFF}
 Recirculated air {Indicator light (A) ON}
When the air conditioning turns on, the air
selection is controlled automatically.
When the air conditioning turns off, the air
selection automatically goes back to the out-
side air position.
The air selection indicator light (A) shows the
selected position.
Temperature control dial
NOTE
 While the engine coolant temperature is low,
the temperature of the air from the heater
will be cool/cold until the engine warms up,
even if you have selected warm air with the
dial.
 For instructions on how to use the “MAX
A/C” position (A), refer to “For quick cool-
ing” on page 7-11.
Mode selection dial
Air selection switch
NOTE
 When the air conditioning operates with the
air selection switch (A) in the outside air
position, the system automatically deter-
mines whether to continue using outside air
or to perform recirculation.
If the outside temperature is high, the system
selects recirculation to achieve rapid cooling
and causes the air selection indicator in the
switch to illuminate. When the air condition-
ing turns off or the blower speed selection
dial is set to the “OFF” position, the air
selection automatically goes back to the out-
side position.