Operation Manual

Heater without air conditioning function (if so equipped)
Comfort controls 7-5
7
N00738000044
Turn the temperature control dial clockwise
to make the air warmer. Turn it counterclock-
wise to make the air cooler.
N00738100058
To change the amount of air flowing from the
vents, turn the mode selection dial. Refer to
“Changing the mode selection” on page 7-2.
N00738200033
Normally, use the outside air position to keep
the windshield and side windows clear and to
quickly remove fog or frost from the wind-
shield.
To change the air selection, simply press the
air selection switch. A sound will be made
every time you push the switch.
 Outside air {Indicator light (A) OFF}
 Recirculation air {Indicator light (A) ON}
The air selection indicator light (A) shows the
selected position.
If the outside air is dusty or contaminated in
some way, use the recirculation position.
Switch to the outside air position every now
and then to keep the windows from fogging
up.
Temperature control dial
NOTE
 While the engine coolant temperature is low,
the temperature of the air from the heater
will be cool/cold until the engine warms up,
even if you have selected warm air with the
dial.
Mode selection dial
Air selection switch
CAUTION
 Using recirculated air for a long time may
cause the windows to fog up.