Operation Manual

USB input terminal (if so equipped)
Features and controls 5-185
5
2. Open the USB input terminal cover (A) in
the glove compartment.
3. Connect the Dock connector (C) to the
iPod (B).
4. Connect the Dock connector (C) to the
USB input terminal (D).
5. To remove the Dock connector, turn the
ignition switch to the “LOCK” position
first and perform the installation steps in
reverse.
N00567000028
N00567100087
Devices of the following types can be con-
nected.
*: “iPod touch,” “iPod classic,” “iPod” and
“iPod nano” are registered trademarks of
NOTE
 Use a genuine Dock connector from Apple
Inc.
WARNING
 An open glove compartment door can
cause a serious injury or death to the front
passenger in an accident, even if the pas-
senger is wearing his/her seat belt. Always
keep the glove compartment door closed
when driving.
NOTE
 When closing the glove compartment, be
careful not to trap the connector cable.
Types of connectable devices
and supported file specifica-
tions
Device types
Model name Condition
USB memory device
Storage capacity of
256 Mbytes or more
iPod touch*
F/W Ver.1.1.1 or
later
iPod classic* F/W Ver.1.0 or later
iPod (fifth genera-
tion)*
F/W Ver.1.2.2 or
later
iPod nano (fifth gen-
eration)*
F/W Ver.1.2 or later
iPod nano (second
generation)*
F/W Ver.1.1.2 or
later
Models other than
USB memory
devices and iPods
Digital audio player
supporting mass
storage class