Operation Manual

USB input terminal (if so equipped)
5-184 Features and controls
5
The following explains how to connect and
remove a USB memory device or iPod.
Refer to the following sections for details on
how to play music files:
Refer to “Listen to Audio Files on a USB
Device” on page 7-49.
N00566800074
1. Park your vehicle in a safe place and turn
the ignition switch to the “LOCK” posi-
tion.
2. Open the USB input terminal cover (A) in
the glove compartment.
3. Connect a commercially available USB
connector cable (C) to the USB memory
device (B).
4. Connect the USB connector cable (C) to
the USB input terminal (D).
5. To remove the USB connector cable, turn
the ignition switch to the “LOCK” posi-
tion first and perform the installation steps
in reverse.
N00566900020
1. Park your vehicle in a safe place and turn
the ignition switch to the “LOCK” posi-
tion.
*:“iPod” is a registered trademark of Apple
Inc. in the United States and other coun-
tries.
How to connect a USB memory
device
WARNING
 An open glove compartment door can
cause a serious injury or death to the front
passenger in an accident, even if the pas-
senger is wearing his/her seat belt. Always
keep the glove compartment door closed
when driving.
NOTE
 Do not connect the USB memory device to
the USB input terminal directly.
The USB memory device may be damaged.
 When closing the glove compartment, be
careful not to trap the USB connector cable.
How to connect an iPod