Operation Manual

Bluetooth® 2.0 interface (if so equipped)
5-162 Features and controls
5
The system is equipped with a voice recogni-
tion function, which allows you to make
hands-free calls by simple switch operations
and voice command operations using a
defined voice tree.
The Bluetooth
®
2.0 interface can be used
when the ignition switch is in the “ON” or
“ACC” position.
Before you can use the Bluetooth
®
2.0 inter-
face, you must pair the Bluetooth
®
device
and Bluetooth
®
2.0 interface. Refer to “Con-
necting the Bluetooth
®
2.0 interface and
Bluetooth
®
device” on page 5-169.
Bluetooth
®
is a registered trademark of
BLUETOOTH SIG, INC.
Steering control switch and microphone 
P.5-163
Voice recognition function  P.5-165
Useful voice commands  P.5-165
Speaker enrollment function  P.5-167
Connecting the Bluetooth
®
2.0 interface and
the Bluetooth
®
device  P.5-169
Operating a music player connected via Blue-
tooth
®
 P.5-173
How to make or receive hands-free calls 
P.5-173
Phonebook function  P.5-176
WARNING
 Although the Bluetooth
®
2.0 interface
allows you to make hands-free calls, if you
choose to use the cellular phone while
driving, you must not allow yourself to be
distracted from the safe operation of your
vehicle. Anything, including cellular
phone usage, that distracts you from the
safe operation of your vehicle increases
your risk of an accident.
 Refer to and comply with all state and
local laws in your area regarding cellular
phone usage while driving.
NOTE
 If the ignition switch is left in the “ACC”
position, the accessory power will automati-
cally turn off after a certain period of time
and you will no longer be able to use the
Bluetooth
®
2.0 interface. The accessory
power comes on again if the ignition switch
is turned from the “ACC” position. Refer to
“ACC power auto-cutout function” on page
5-55.
 The Bluetooth
®
2.0 interface cannot be used
if the Bluetooth
®
device has a dead battery
or the device power is turned off.
 Hands-free calls will not be possible if your
phone does not have service available.
 Some Bluetooth
®
devices are not compatible
with the Bluetooth
®
2.0 interface.
 You can confirm the Link System software
version by pressing the HANG-UP button 3
times (press and hold 2 times and then press
briefly) within 10 seconds.
 For detail of the Bluetooth
®
2.0 interface,
refer to the following web site:
[For vehicles sold in U.S.A.]
You can see to access the MITSUBISHI
MOTORS NORTH AMERICA web site.
[For vehicles sold in Canada and Mexico]
You can see to access via the MITSUBISHI
MOTORS web site.
Please read and agree the “Warning about
Links to the Web Sites of Other Companies”
because it connects other than MITSUBISHI
MOTORS web site.
http://www.mitsubishi-motors.com/en/prod-
ucts/index.html
 Software updates by cellular phone/digital
audio device manufacturers may
change/alter device connectivity.
NOTE