Operation Manual

Combination headlights and dimmer switch
Features and controls 5-153
5
N00563201133
This function turns on the front side-marker
and parking lights for about 30 seconds after
the UNLOCK button (A) on the remote con-
trol transmitter is pressed when the combina-
tion headlights and dimmer switch is in the
“OFF” or “AUTO” position (for vehicles
equipped with the automatic light control).
On vehicles equipped with the automatic light
control, the welcome light function will oper-
ate only when it is dark outside the vehicle.
N00547300054
This function turns on the headlights in the
low beam setting for about 30 seconds after
the ignition switch is turned to the “LOCK”
position.
1. Turn the combination headlights and dim-
mer switch to the “OFF” or “AUTO”
position (for vehicles equipped with the
automatic light control).
2. Turn the ignition switch to the “LOCK”
position. Also, if a key was used to start
the engine, remove the key from the igni-
tion switch.
 If you turn the lights off with the headlights
set to high-beam illumination, the headlights
are automatically returned to their low-beam
setting when the combination headlights and
dimmer switch is next turned to the “ ”
position.
Welcome light (for vehicles with
the theft-alarm system)
NOTE
NOTE
 While the welcome light function is operat-
ing, perform one of the following operations
to cancel the function.
• Push the LOCK button (B) on the remote
control transmitter.
• Turn the combination headlights and dim-
mer switch to the “ ” or “ ” position.
• Turn the ignition switch to the “ON” posi-
tion.
 It is possible to modify functions as follows:
• The headlights can be set to come on in the
low beam setting.
• The welcome light function can be deacti-
vated.
For details, consult a Mitsubishi Motors
dealer.
Coming home light
NOTE