Operation Manual

Combination headlights and dimmer switch
Features and controls 5-151
5
N00532601607
 If the ignition key is turned to “LOCK” or
“ACC” position or removed from the
ignition switch and the driver’s door is
opened with the combination headlights
and dimmer switch in the “ ” or “ ”
position, the lights automatically turn off.
[When using a key to start the engine]
• If the driver’s door is opened after the
key is removed from the ignition switch,
a high-pitched constant tone will sound
to remind you to turn off the lights.
• If the driver’s door is opened with the
key in the ignition switch, a low-pitched
tone will sound to remind you to remove
the key.
[When using the F.A.S.T.-key to start the
engine]
• If the ignition switch is turned to the
“LOCK” position and the driver’s door
is opened, a high-pitched constant
buzzer will sound to remind you to turn
off the lights.
• If the ignition switch is turned to any
position other than “LOCK” and the
driver’s door is opened, a low-pitched
constant buzzer will sound to remind
you to return the ignition switch.
 If the ignition switch is turned to “LOCK”
or “ACC” position with the driver’s door
closed and the combination headlights
and dimmer switch in the “ ” or “ ”
position, the lights will stay on for about 3
minutes and then turn off automatically.
If the combination headlights and dimmer
switch is turned to the “ ” or “ ” posi-
tion again after the engine is turned off, the
about 3 minutes auto-cutout function
described above will not work. The lights (the
parking lights, tail lights and license plate
lights) will stay on and will not turn off auto-
matically.
Parking, tail, front and rear side-
marker lights, license plate and
instrument panel lights on
Headlights and other lights on
NOTE
 The sensitivity of the automatic on/off con-
trol can be adjusted.
For further information, please contact your
authorized Mitsubishi Motors dealer or a
repair facility of your choice.
 Do not cover the sensor (A) for the automatic
on/off control by affixing a sticker or label to
the windshield.
 If the lights do not turn on or off with the
switch in the “AUTO” position, manually
operate the switch and we recommend you to
have your vehicle checked.
Light auto-cutout function
(headlights and other lights)
NOTE
 The light auto-cutout function can be deacti-
vated.
See your authorized Mitsubishi Motors
dealer for details.
When you want to keep the lights
on: