Operation Manual

Indicator light, warning light, and information screen display list
5-134 Features and controls
5
N00557900024
When there is information to be announced, such as light reminders, the tone sounds and the screen switches to the displays shown below. Refer
to the appropriate page and take the necessary measures.
When the cause of the warning display is eliminated, the warning display goes out automatically.
Refer to “Warning display list (With ignition switch in the “OFF” position)” on page 5-134.
Refer to “Warning display list (With ignition switch in the “ON” position)” on page 5-137.
Refer to “Other interrupt displays (With ignition switch in the “ON” position)” on page 5-143.
N00558000165
Information screen display list
NOTE
 In the following cases, a warning may be displayed on the information screen and the buzzer may sound for a few seconds, at times.
This is caused by the system picking up interference such as strong electromagnetic waves or noise, and is not a functional problem.
• An extremely strong electromagnetic wave is received from a source such as an illegal radio set, a spark from a wire, or a radar station.
• Abnormal voltage or a static electricity discharge is generated by the operation of installed electronics (including after-market parts).
If the warning display has occurred a number of times, take your vehicle to an authorized Mitsubishi Motors dealer or a repair facility of your choice and
have the system checked.
Warning display list (With ignition switch in the “OFF” position)
Screen type 1 Screen type 2 Cause Do this (Reference)
 You have forgotten to remove the key
from the ignition switch.
 Remove the key.
Refer to “Key reminder system” on
page 5-37.