Operation Manual

Multi-information display
5-130 Features and controls
5
2. Lightly press the multi-information meter
switch to select “ ” (operation sound
setting).
3. Press and hold the multi-information
meter switch (for about 2 seconds or
more) to switch in sequence from ON
(operation sound on)  OFF (operation
sound off)  ON (operation sound on).
The setting is changed to the selected con-
dition.
N00557500121
The amount of time until the display appears
can be changed.
1. Press and hold the multi-information
meter switch (for about 2 seconds or
more) to switch from the setting mode
screen to the menu screen.
Refer to “Changing the function settings
(With ignition switch in the “ON” posi-
tion)” on page 5-126.
2. Lightly press the multi-information meter
switch to select “ALARM” (rest time set-
ting).
3. Press and hold the multi-information
meter switch (for about 2 seconds or
more) to display “ALARM” (rest time
setting).
NOTE
 If the battery is disconnected, the memory of
the operation sound setting is erased and is
automatically set to “ON” (operation sound
on).
Type 1
Type 2
 The operation sound setting only deactivates
the operation sound of the multi-information
meter switch and rheostat meter illumination
button. The warning display and other
sounds cannot be deactivated.
Changing the amount of time until
“REST REMINDER” is displayed
NOTE
Type 1
Type 2
Type 1
Type 2