Operation Manual

Multi-information display
5-128 Features and controls
5
1. Press and hold the multi-information
meter switch (for about 2 seconds or
more) to change from the setting mode
screen to the menu screen.
Refer to “Changing the function settings
(With ignition switch in the “ON” posi-
tion)” on page 5-126.
2. Lightly press the multi-information meter
switch to select “AVG UNIT” (fuel con-
sumption display unit setting).
3. Press and hold the multi-information
meter switch (for about 2 seconds or
more) to display “AVG UNIT” (fuel con-
sumption display unit setting).
4. Lightly press the multi-information meter
switch to switch in sequence from km/L
 L/100 km  mpg (US)  mpg (UK)
 RETURN  km/L.
5. Press and hold the multi-information
meter switch (for about 2 seconds or
more) to change the setting to the selected
unit.
The distance and speed units are also changed
in the following combinations to match the
selected fuel consumption unit.
N00557200102
The temperature display unit can be changed.
1. Press and hold the multi-information
meter switch (for about 2 seconds or
more) to change from the setting mode
screen to the menu screen.
Refer to “Changing the function settings
(With ignition switch in the “ON” posi-
tion)” on page 5-126.
Type 1
Type 2
NOTE
 The display units for the driving range, the
average fuel consumption, the average speed
and the momentary fuel consumption are
changed, but the units for the indicating nee-
dle (speedometer), the odometer and the trip
odometer will remain unchanged.
Type 2
Type 1
 If the battery is disconnected, the memory of
the unit setting is erased and is automatically
set to {mpg (US) or L/100 km}.
Fuel econ-
omy
Distance
(driving
range)
Speed
(average
speed)
mpg (US) mile (s) mph
mpg (UK) mile (s) mph
km /L km km /h
L /100 km km km /h
Changing the temperature unit
NOTE