Operation Manual

Multi-information display
5-126 Features and controls
5
N00556801153
1. Park your vehicle in a safe place.
Fully apply the parking brake and move
the shift lever into the “N” position (man-
ual transaxle), the selector lever {continu-
ously variable transmission (CVT)} or the
gearshift lever (Twin Clutch SST) into the
“P” position.
2. When you lightly press the multi-informa-
tion meter switch, the information screen
changes to the function setting screen.
Refer to “Information screen (With igni-
tion switch in the “ON” position)” on
page 5-118.
3. Press and hold the multi-information
meter switch (for about 2 seconds or
more) to switch from the setting mode
screen to the menu screen.
4. Select the item to change on the menu
screen and change to the desired setting.
For further details on the operation meth-
ods, refer to the following sections.
Refer to “Changing the reset mode for
average fuel consumption and average
speed” on page 5-127.
Refer to “Changing the fuel consumption
display unit” on page 5-127.
Refer to “Changing the temperature unit”
on page 5-128.
Refer to “Changing the display language”
on page 5-129.
Refer to “Operation sound setting” on
page 5-129.
Refer to “Changing the amount of time
until “REST REMINDER” is displayed”
on page 5-130.
Refer to “Changing the turn signal sound”
on page 5-131.
Refer to “Changing the momentary fuel
consumption display (Type 2)” on page
5-131.
Refer to “Returning to the factory set-
tings” on page 5-132.
Changing the function settings
(With ignition switch in the
“ON” position)
Type 1 Type 2
CAUTION
 For safety, stop the vehicle before operating.
While driving, even if you operate the multi-
information meter switch, the function set-
ting screen is not displayed.
NOTE
 To return the menu screen to the function set-
ting screen, press and hold the multi-infor-
mation meter switch (for about 2 seconds or
more).
Type 1
Type 2
 If no operations are made within about 15
seconds of the menu screen being displayed,
the display returns to the function setting
screen.
NOTE