Operation Manual

Multi-information display
Features and controls 5-125
5
2. Press and hold the multi-information
meter switch (for about 2 seconds or
more) to display “ ” and make it flash.
(If there is no operation for about 10 sec-
onds with this indicator flashing, the dis-
play returns to the previous screen.)
3. With this indicator flashing, if you lightly
press the multi-information meter switch,
the screen switches from “---” to
“CLEAR”. After that, the time until the
next periodic inspection is shown.
N00555700145
If any of the doors or the trunk lid is not com-
pletely closed, this displays the open door or
trunk lid.
If the speed increases to about 5 mph (8
km/h) or higher with a door ajar, a buzzer will
sound 4 times to inform you that a door is
ajar.
The buzzer will not sound if only the trunk lid
is open.
Type 1
Type 2
Type 1
Type 2
CAUTION
 The customer is responsible for making sure
that regular inspections and maintenance and
periodic inspections and maintenance are
performed.
Inspections and maintenance must be per-
formed to prevent accidents and malfunc-
tions.
NOTE
 The “---” display cannot be reset while the
ignition switch is in the “ON” position.
 When “---” is displayed, after a certain dis-
tance and a certain period of time, the dis-
play is reset and the time until the next
periodic inspection is displayed.
 If you accidentally reset the display, consult
an authorized Mitsubishi Motors dealer for
assistance.
Door ajar warning display
(With ignition switch in the
“ON” position)
CAUTION
 Always make sure that the warning display
goes out before beginning to drive.