Operation Manual

Multi-information display
5-122 Features and controls
5
When the warning is displayed, if you
lightly press the multi-information meter
switch a few times, the warning display
screen you switched from is redisplayed.
The operation status of each system is dis-
played on the information screen.
For further details, refer to the appropriate
page in the warning display list.
Refer to “Other interrupt displays (With igni-
tion switch in the “ON” position)” on page
5-143.
N00556400048
Shows the position of the selector lever.
Refer to “Selector lever operation” on page
5-63.
N00545800055
Shows the position of the gearshift lever.
Refer to “Gearshift lever operation” on page
5-71.
N00556500094
Shows the temperature outside the vehicle.
N00545100029
The operation status of the Twin Clutch SST
control mode is displayed. Refer to “Twin
Clutch SST control mode” on page 5-76.
N00545900030
The operation status of the ACD control
mode is displayed.
NOTE
 Warning display screens with a “ ” or
“ ” mark displayed in the upper right of the
screen can be switched. If you want to switch
the display, press the multi-information
meter switch as follows.
“ ”: Press lightly.
“ ”: Press for about 2 seconds or more.
Redisplay of a warning display
screen
Type 1
Type 2
Other interrupt displays
Selector lever position display
screen {continuously variable
transmission (CVT)}
Gearshift lever position display
screen (Twin Clutch SST)
Outside temperature display
screen
NOTE
 The display setting can be changed to the
preferred units (°F or °C).
Refer to “Changing the function settings
(With ignition switch in the “ON” position)”
on page 5-126.
 Depending on factors such as the driving
conditions, the displayed temperature may
vary from the actual outside temperature.
Twin Clutch SST control mode
display screen (Twin Clutch
SST)
ACD control mode display
screen (if so equipped)