Operation Manual

Multi-information display
Features and controls 5-121
5
While driving, the momentary fuel consump-
tion is shown with a bar graph.
When the momentary fuel consumption sur-
passes the average fuel consumption, the
momentary fuel consumption is displayed
with a green bar graph. (Type 2)
Be conscious of maintaining the momentary
fuel consumption above the average fuel con-
sumption, it can help you drive with the better
fuel consumption.
The “Display language”, “Temperature unit”,
“Fuel consumption unit”, and “Average fuel
consumption and speed reset method” set-
tings can be modified as desired.
For further details, refer to “Changing the
function settings (With ignition switch in the
“ON” position)” on page 5-126.
N00556300135
When there is information to be announced,
such as a system fault, a tone sounds and the
information screen is switched to the warning
display screen.
Refer to the warning list and take the neces-
sary measures. Refer to “Warning display list
(With ignition switch in the “ON” position)”
on page 5-137.
When the cause of the warning display is
eliminated, the warning display goes out
automatically.
Even if the cause of the warning display is
not eliminated, you can return to the screen
that was displayed before the warning dis-
play.
If you press the multi-information meter
switch, the display screen switches to the
screen display from before the warning and
the warning (A) is displayed.
NOTE
 The average speed display and the average
fuel consumption display can be reset sepa-
rately in both auto reset mode and manual
reset mode.
 “---” is displayed when the average fuel con-
sumption cannot be measured.
 The initial (default) setting is “Auto reset
mode”.
 Average fuel consumption may vary depend
on the driving conditions (road conditions,
how you drive, etc.) The actual fuel con-
sumption may differ from the fuel consump-
tion displayed, so treat the fuel consumption
displayed as just a rough guideline.
 The average fuel consumption display mem-
ories for auto reset mode and manual reset
mode are erased if the battery is discon-
nected.
 The display setting can be changed to the
preferred units {mpg (US), mpg (UK), L/100
km or km/L}.
Refer to “Changing the function settings
(With ignition switch in the “ON” position)”
on page 5-126.
Momentary fuel consumption dis-
play
NOTE
 When the momentary fuel consumption can-
not be measured, a bar graph is not shown.
 The display setting can be changed to the
preferred units {mpg (US), mpg (UK), L/100
km or km/L}.
Refer to “Changing the function settings
(With ignition switch in the “ON” position)”
on page 5-126.
 It is possible to cancel the green bar graph.
Refer to “Changing the function settings
(With ignition switch in the “ON” position)”
on page 5-126.
Function setting screen
Interrupt display screen (With
ignition switch in the “ON”
position)
Warning display
Returning to the display screen from
before the warning display